I. How to recognize performance of Eureka Auto DryBox by the users?

If the reading is higher than 60%RH, customers will need to check performance of Drying Unit.

Here are the steps for self-examination.

1. Remove the plug from the wall socket.
2. Empty the cabinet.
3. Turn the controller to position H.
4. Close the door of the cabinet.
5. Wait for 10 mins
6. Insert the plug back into the wall socket
7. Leave the dry cabinet on for 12 hours and please dont not open the door during this period of time.
8. After 12 hours, check the reading on the hygrometer. If  its less than 40%, the dry cabinet can now be used.
9. If RH is remains higher than 60% , please contact us at 6749 1812

II. Indicator of Hygrometer

Please note that when you read the reading of hygrometer, please see the narrow, long side of the needle, instead of short and arrow side.